Home > UTV > X3 Turbo 120HP >

CanAm X3 Turbo Power Tune Dual Charge Tube Kit

Alternative Views:

Our Price: $118.95

Stock Status:In Stock

Availability:: Usually Ships in 24 Hours

Add Set of 6 T-Bolt Clamps

Complete T-Bolt Clamp Set [Add $42.00]
Blow Off Valve or Plug

add Turbosmart BOV with Outerwears Cover [Add $179.55]
add Turbosmart BOV [Add $164.55]
add Plug for BOV Port [Add $11.95]


CanAm X3 Turbo Power Tune Dual Charge Tube Kit

Dual Charge Tube Kit for Adding BOV
2018-2019 all X3 Turbo R Models (including Max, XRC, XMR)
2017 all X3 Models (including Max)

  • Replaces the Stock Rubber Charge Tubes
  • 1.0 inch port for Blow Off Valve
  • High Pressure Grey or Black Silicon Hose (grey out of stock)
  • Easy 20 minute install
  • Molded to Fit Like Stock

These great looking silicon charge tubes will help dress up your X3 with added performance features. Unlike the stock rubber hoses these silicon hoses are less likely to slip loose once installed correctly. You can be purchased with the optional plug, if you do not want to use a Blow Off Valve, or add a Turbosmart Blow off Valve. We also have an optional T-Bolt clamp kit for added protection.

This kit takes maybe 20 minutes to install. All you have to do is swap your charge tubes for the new silicon units, if you add a BOV plug in the new boost/vacuum nipple, and attach your new blow off valve. The kit locates your optional new valve behind the drivers compartment access panel so it's shielded from flying rocks and right behind you for the best sound. We configure and test these valves at our shop so they are ready to run. No adjustment is necessary for the best performance.

When properly installed the charge tubes are rated to hold 30+ psi boost pressure.

This Kit Features

Primary and Secondary Charge Tubes
Manifold Port for Vacuum/Boost Reference
Boost/Vacuum Hose
Optional Turbosmart Blow Off Valve
Optional Plug for BOV port

Share your knowledge of this product. Be the first to write a review »