Home > UTV >

Dynojet Launch Control Module for 2017-2020 Can Am Maverick X3
Dynojet X3 Launch Control Module


 
Alternative Views:




Starting at $345.99

Stock Status:(Out of Stock)

Availability:: Usually Ships in 24 Hours

Setup LCM Before Shipping

No Thanks
Yes Please [Add $20.00]

Launch RPM:


Time Delay:

Tune File Adjustment for Power Vision Users



Qty:  
Description
 

Dynojet Launch Control Module for 2016-2020 Can Am Maverick X3

all models 2017-2020 Can Am Maverick X3

  • Allows for wide-open throttle during launch
  • No torque limitations
  • True two-step
  • Designed to withstand heat, dirt and moisture
  • Comes with an activation switch and harness

Dynojet’s Launch Control Module (a true two-step) easily connects to the Can Am Maverick X3, delivering a surge of power when you first drop the hammer. This push button control module allows for wide-open throttle during launch — with no torque limitations. Requires custom tuning.

The Launch Control Module is the ideal power starter for Can-Am, fitting Maverick X3 models from 2017-2020.

This kit includes everything you need for installation, allowing you to bring the heat right out of the gate. Installation is easy, featuring plug-and-play design that connects to the OEM wiring harness — no cutting or splicing required.

Through Power Core Software, you’ll have the ability to adjust launch RPM, though we recommend setting the launch RPM to match the primary clutch engagement RPM to avoid potential belt or clutch damage.

Do you already run a Power Tune with a Power Vision?
We can adjust your tune file to work with the LCM, select this options above.

Would you like the LCM pre-setup?
We can setup the LCM for you before shipping. Select the launch RPM to match your clutch engagement, 200 RPM below your clutch engagement RPM will work best to start. You can also select the time to arm in seconds. This is the time required to hold the button down before the LCM will work, 2 seconds is recommended. You can download the Dynojet Power Core C3 tuning software and modify this yourself anytime.


Share your knowledge of this product. Be the first to write a review »