Home > UTV >

Dynojet Launch Control Module for 2016-2020 RZR Turbo
Dynojet RZR Turbo Launch Control Module


 



Starting at $341.99

Stock Status:In Stock


Availability:: Usually Ships in 24 Hours

Setup LCM Before Shipping

No Thanks
Yes Please [Add $20.00]

Launch RPM:

Time Delay:
Tune File Adjustment for Power Vision Users



Qty:  
Description
 

Dynojet Launch Control Module for 2016-2020 RZR Turbo (no switch)

all models 2016-2020 RZR Turbo and Turbo S

  • Allows for wide-open throttle during launch
  • No torque limitations
  • True two-step
  • Designed to withstand heat, dirt and moisture
  • Comes with a harness
  • Interfaces to a coil pack
    • This kit does not include a momentary switch/button
    • You will need a button to activate the LCM

    Dynojet’s Launch Control Module (a true two-step) easily connects to the Polaris RZR, delivering a surge of power when you first drop the hammer. This push button control module allows for wide-open throttle during launch — with no torque limitations. Requires custom tuning.

    The Launch Control Module is the ideal power starter for your Polaris RZR. This kit includes everything you need for installation, allowing you to bring the heat right out of the gate. Installation is easy, featuring plug-and-play design that connects to the OEM wiring harness — no cutting or splicing required.

    This particular module interfaces to a coil pack.

    Through Power Core Software, you’ll have the ability to adjust launch RPM, though we recommend setting the launch RPM to match the primary clutch engagement RPM to avoid potential belt or clutch damage.

    Do you already run a Power Tune with a Power Vision?
    We can adjust your tune file to work with the LCM, select this options above.

    Would you like the LCM pre-setup?
    We can setup the LCM for you before shipping. Select the launch RPM to match your clutch engagement, 200 RPM below your clutch engagement RPM will work best to start. You can also select the time to arm in seconds. This is the time required to hold the button down before the LCM will work, 2 seconds is recommended. You can download the Dynojet Power Core C3 tuning software and modify this yourself anytime.


    Share your knowledge of this product. Be the first to write a review »